Why Is Kansas City Airport Code Mci? 2023

Why Is Kansas City Airport Code Mci?

Why Is Kansas City Airport Code Mci

When did KCI become MCI?

On October 21-23, 1972, the Kansas City International Airport (KCI), which had previously been known as Mid-Continent International Airport (MCI), was formally dedicated. The prominent Kansas City architectural firm of Kivett and Myers, in collaboration with Burns & McDonnell, designed the three terminals (A, B, and C) in the Brutalist style.

The “Drive-to-your-gate” configuration of each of the three terminals was an innovative design that was the first of its kind to be implemented anywhere in the world.
Before Kansas City International Airport (KCI) was built, the city of Kansas City utilized two additional airports as its principal airports.

In 1928, the Fairfax Industrial Airport in Kansas City, Kansas, opened its doors. This airport would later become the site of the maintenance facility for Trans World Airlines (TWA). The TWA headquarters were first located at the Municipal Airport, which had opened its doors in 1929 and is today known as the Charles B.

Wheeler Downtown Airport.
Both Municipal Airport and Fairfax Industrial Airport sustained significant damage as a result of the flood that occurred in Kansas City in 1951.
Both sites were severely damaged by the water, but the TWA overhaul base sustained far more destruction than the other.
The only viable answer was to locate a location for a new airport because both existing airports were landlocked and hence unable to expand.

In collaboration with the Platte County Courts, the Aviation Committee of Kansas City’s city council and the Kansas City Airport Selection Committee investigated a 3,300-acre site that is located just north of downtown Kansas City and is close to what is now known as Interstate 29.

Platte County in Kansas was selected as the site for the new Mid-Continent Airport (MCI), which is now known as the Kansas City International Airport, on May 3, 1953, after Kansas City officials recognized the potential and the need to have sufficient distance for landing and takeoff.
These two factors led to the purchase of a total of 4,590 acres in Platte County.

After finishing off the purchase of the land, Kansas City entered into discussions with TWA to invite the company to locate their maintenance facility at the location. Construction of the airport began in the fall of 1954, following the signing of a contract in April 1954 that leased 250 acres to TWA.

The TWA overhaul base received its first control tower in 1954, as well as its first two runways, which were erected between the years of 1954 and 1956.
The Missouri Valley Special Collections are located in the Kansas City Public Library and contain digitized versions of thousands of historical pictures and other documents relating to the history of the Kansas City metropolitan area.

There are images and papers that pertain to the development, building, and history of KCI that may be found in this collection, which can be located here.

What does KCI airport stand for?

KCI Airport, also known by its IATA code of MCI, has a backup plan in place in case of tarmac delays. The Kansas City International Airport, often known as KCI, was established in 1972 and was constructed by the city of Kansas City, Missouri. Because of its low level of congestion and low number of aircraft delays, it has been recognized for a long time as one of the most desirable commercial airports in the whole globe.

The KCI complex encompasses more than 10,000 acres, and the airport’s three runways have the capacity to support 139 aircraft takeoffs and landings every hour. Because to its lack of crowded air and ground space, its short taxi time, and its low incidence of closures and cancellations caused by the weather, Kansas City International Airport routinely ranks among the least delayed of all airports in the United States.

Even in the toughest conditions, the airport’s three runways, two of which are parallel with a spacing of 6,575 feet between them, Category III instrument Landing System, and other characteristics assist keep operations running smoothly. The airport’s efficiency and convenience to air carriers have been significantly improved as a result of the installation of new surfaces on the runways, taxiways, and terminal aprons, as well as the ongoing infrastructural renovations.

Signature Flight Support is an on-airport fixed-base operator that provides a variety of services, including basic fuelling, chartering, and ground transportation.
Many operators of regional aircraft simply fly into Kansas City International Airport, where they are then carried via shuttle to the airline terminals and on to their final destination, which is often located outside of the region.

Visit our MCI Operations and Pilot Information page for further details if you require further information. MCI was the airport’s original name, and the International Air Transportation Association (IATA) chose to use MCI as the airport’s designator code.

The original name of KCI was Mid-Continent International Airport, or MCI.
In addition, airports in the United States are not permitted to use codes with the letters N, K, or W as the initial letter of the prefix.
The prefix N is set aside only for use with airplanes, whereas the prefixes K and W are used exclusively for radio call signs.

The airport is commonly referred to by its acronym, KCI, both by locals and by others. KCI was used for many years as the landing strip for the TWA overhaul base and as an alternate airport for the former Kansas City Municipal Airport. Both of these functions were performed at KCI.

Terminals and new runways were constructed at what is now known as KCI Airport when it was determined that Municipal Airport was too small and unable to expand.
After being renamed the Kansas City Downtown Airport and then the Charles B.
Wheeler Downtown Airport, Municipal is no longer in use.
CI is a participant in the “One Percent for Art” initiative that is run by the Municipal Art Commission in the city of Kansas City, Missouri, in the United States of America.

This initiative mandates that one percent of the expenditures associated with public building be put aside for the development of public art. It is now being implemented in over 300 cities and counties across the United States. The artist for each project at KCI is chosen by a panel consisting of aviation experts, members from the local community, and artists.

What is the IATA code for KCI?

The KCI complex encompasses more than 10,000 acres, and the airport’s three runways have the capacity to support 139 aircraft takeoffs and landings every hour.
Because to its lack of crowded air and ground space, its short taxi time, and its low incidence of closures and cancellations caused by the weather, Kansas City International Airport routinely ranks among the least delayed of all airports in the United States.

Signature Flight Support is an on-airport fixed-base operator that provides a variety of services, including basic fuelling, chartering, and ground transportation. Many operators of regional aircraft simply fly into Kansas City International Airport, where they are then carried via shuttle to the airline terminals and on to their final destination, which is often located outside of the region.

The original name of KCI was Mid-Continent International Airport, or MCI. In addition, airports in the United States are not permitted to use codes with the letters N, K, or W as the initial letter of the prefix. The prefix N is set aside only for use with airplanes, whereas the prefixes K and W are used exclusively for radio call signs.

The airport is commonly referred to by its acronym, KCI, both by locals and by those from other areas. KCI was used for many years as the landing strip for the TWA overhaul base and as an alternate airport for the former Kansas City Municipal Airport.

Both of these functions were performed at KCI.
Terminals and new runways were constructed at what is now known as KCI Airport when it was determined that Municipal Airport was too small and unable to expand.
After being renamed the Kansas City Downtown Airport and then the Charles B.
Wheeler Downtown Airport, Municipal is no longer in use.

KCI is a participant in the “One Percent for Art” initiative that is run by the Municipal Art Commission in the city of Kansas City, Missouri, in the United States of America. This initiative mandates that one percent of the expenditures associated with public building be put aside for the development of public art.

It is now being implemented in over 300 cities and counties across the United States.
The artist for each project at KCI is chosen by a panel consisting of aviation experts, members from the local community, and artists.
The Municipal Art Commission is able to act as a catalyst for creative growth and aesthetic quality in our neighborhoods because to the One Percent for Art Program.

As a result, the vitality of Kansas City is improved, and the lives of its residents are enriched. Please click here if you are interested in learning more about the art that is offered at KCI.

What does MCI stand for in airport designator codes?

The KCI complex encompasses more than 10,000 acres, and the airport’s three runways have the capacity to support 139 aircraft takeoffs and landings every hour. KCI typically rates among the lowest in delays of all airports in the United States. This is due to the airport’s uncongested air and ground space, as well as its short taxi time and low incidence of closures or cancellations caused by the weather.

Signature Flight Support is an on-airport fixed-base operator that provides a variety of services, including basic fuelling, chartering, and ground transportation.
Many operators of regional aircraft simply fly into Kansas City International Airport, where they are then carried via shuttle to the airline terminals and on to their final destination, which is often located outside of the region.

The original name of KCI was Mid-Continent International Airport, or MCI.
In addition, airports in the United States are not permitted to use codes with the letters N, K, or W as the initial letter of the prefix.
The prefix N is set aside only for use with airplanes, whereas the prefixes K and W are used exclusively for radio call signs.

Both of these functions were performed at KCI. Terminals and new runways were constructed at what is now known as KCI Airport when it was determined that Municipal Airport was too small and unable to expand. After being renamed the Kansas City Downtown Airport and then the Charles B. Wheeler Downtown Airport, Municipal is no longer in use.

It is now being implemented in over 300 cities and counties across the United States. The artist for each project at KCI is chosen by a panel consisting of aviation experts, members from the local community, and artists. The Municipal Art Commission is able to act as a catalyst for creative growth and aesthetic quality in our neighborhoods because to the One Percent for Art Program.

As a result, the vitality of Kansas City is improved, and the lives of its residents are enriched. Please click here if you are interested in learning more about the art that is offered at KCI.

What does KMCI stand for?

Kansas City International Airport


IATA : MCI ICAO : KMCI FAA LID : MCI
Summary
Airport type	Public
Owner/Operator	Kansas City Aviation Department
Serves	Kansas City metropolitan area
Location	Kansas City, Missouri, United States
Elevation AMSL	1,026 ft / 313 m
Coordinates	39°17′51″N 94°42′50″W / 39.29750°N 94.71389°W Coordinates : 39°17′51″N 94°42′50″W / 39.29750°N 94.71389°W
Website	FlyKCI.com
Maps
FAA airport diagram
MCI Show map of Missouri Show map of the United States Show all
Runways

table>

Direction Length Surface ft m 01L/19R 10,801 3,292 Asphalt 01R/19L 9,500 2,896 Concrete 09/27 9,501 2,896 Asphalt

Data and Numbers (2021)

Passengers	7,667,004
Aircraft operations	87,843
Total cargo (lbs.)	243,712,341

table> Source: KCI Traffic Statistics

I am grateful to you, kind benefactor! Because to your generosity, Wikipedia is able to continue to thrive. You can choose to “hide appeals” to prevent this browser from displaying fundraising messages for one week, or you can return to the appeal to make a donation if you are still interested in doing so.

Please, we beg you, do not scroll away from this page. Hi.
Let’s cut to the chase and get to the point: On Wednesday, we will appeal for your assistance in maintaining Wikipedia.98% of those who read our site do not donate.
Many people have the intention of donating later, but they end up forgetting.
To ensure our continued existence, all we ask for is $2, or anything else you can provide.

We beg you, in all modesty, to refrain from scrolling away from this page. If you are one of our very few donors, please accept our sincere gratitude. Kansas City International Airport, formerly known as Mid-Continent International Airport, is a public airport located in Platte County, Missouri, approximately 15 miles (24 kilometers) to the northwest of the central business district of Kansas City.

The airport’s IATA code is MCI, its ICAO code is KMCI, and its FAA LID is MCI.
After its opening in 1972, the airport took over for the Kansas City Municipal Airport (also known as MKC), and as a result, all regularly scheduled passenger airline flights were transferred from MKC to MCI.
The airport encompasses a total area of 10,680 acres or 4,320 hectares and has a total of three runways.

The airport has never been used by the military and has never had an Air National Guard unit stationed there. It has always been a civilian airfield. For the month of December 2018, there were 170 departures of scheduled aircraft on peak travel days. There were 47 airports that received service.

What is the airport code for Kansas City Airport?

The code for the airport The International Air Transport Association (IATA) code for Kansas City International Airport is MCI (US). Find out more information and codes that are associated with this airport. Proceed to the content Menu Try looking up the airport or the nation. Visit our partner About Home Blog Codes from the FAA IATA codes